[wpdreams_ajaxsearchpro id=1]
Include Popp KFOB/Wall-C into the Fibaro Homecenter
11. November 2015
0
Titelbild_KFOB-WALLC-HC2

(1) Include the KFOb to your Homecenter. Start the incluison mode of your Homecenter.KFOB-HC2-1

(2) When the Homecenter started the inclusione mode press the button of the KFOb for 1 second. The LED will blink red/green. The inclusion window of the Homecenter will recognise a new device.

(3) Please do not close the inclusion window! Wait until the window closes automatically. After tht the device is included.

(4) 2 new devices will be shown in the UI.

KFOB-HC2-2

(5) Choose the device with the remote icon. Set the parameters in the remote as you can see in the chart. Press the save icon in the Homecenter. You can hide the other modul in the settings of the device.

ParameterWert
10
20
114
124
134
144

 

KFOB-HC2-3

(6) Wake up the KFOB. Press all 4 buttons simultanously for 1 second to get into management mode. Now press button 2 and the parameters will be set in the KFOB

(7) Within the next step you ope the associationgroups of the KFOB. Then set the associationgroups 1-5 and mark the Homecenter in each group. Now save the settings of the associations. Now you can wake up the KFOB again. Please press all 4 button for 1 second and the press button 2.

KFOB-HC2-4

(8) You can use the KFOB as scenecontroller now. You can use the LUA scene to control the KFOB.

LUA – Scene

–[[

%% properties

XXX sceneActivation

%% globals

–]]

— Taste 1

if ( tonumber(fibaro:getValue(XXX, “sceneActivation”)) == 11)

then

fibaro:startScene(YYY);

end

— Taste 2

if ( tonumber(fibaro:getValue(XXX, “sceneActivation”)) == 31)

then

fibaro:startScene(QQQ);

end

— Taste 3

if ( tonumber(fibaro:getValue(XXX, “sceneActivation”)) == 21)

then

fibaro:startScene(WWW);

end

— Taste 4

if ( tonumber(fibaro:getValue(XXX, “sceneActivation”)) == 41)

then

fibaro:startScene(EEE);

end

Where :

XXX – ID des KFOB

YYY,QQQ,WWW,EEE – ID der Szene

Block Scene

KFOB-HC2-5

 


Leave a reply

Your email address will not be published. Required fields are marked *